Since temperature affects the measuring accuracy of a pressure sensor, there always remains a small temperature error in the rated temperature range despite a variety of compensation measures. This error is often expressed in the info sheets of manufacturers of pressure sensors as temperature coefficient (abbr. TC). This coefficient describes a (linear) error, starting from a reference point, which generally is room temperature.
Accordingly, the temperature error at room temperature is zero and increases with increasing difference of the temperature from room temperature with the specified coefficient in linear fashion (see figure). Basically, High Tech -point temperature coefficient (abbr. TC0), but additionally that of the span (TCC) should be considered individually. The zero-point error describes the result of temperature on the zero signal. How To of the span specifies the effect of temperature on the entire scale value. The individual temperature coefficients of zero point and of span are usually specified as magnitudes, meaning that they can be either positive or negative.
If within Gripping -point error has the same sign because the error of the span, these two temperature errors may add up in worst case. An average value for the average zero-point temperature coefficient of a pressure sensor is: 0.2 % / 10 K. Link to WIKA pressure sensors.g