5 Factors to consider when selecting irrigation pump

rrigation pumps are normally used to pump water from a lower to the next degree from which the water then flows by way of channels to the fields requiring irrigation or to boost it to the required pressure head to be able to spray the fields through piping techniques (sprinkling). The heads concerned vary from approx. 1 m for normal carry operation to forty m for sprinkling. Ocassionally, heads more than 100 m may be required.
At instances, irrigation pumps are usually not geared up with variable pace drives. The circulate fee can subsequently be managed by either switching the pumps on and off, or by using a throttling valve in the discharge pipe, pre-swirl management (e. g. cooling water pumps), rotational speed or impeller blade pitch adjustment. Both horizontal and vertical pumps (e. g. tubular casing pump) are used as irrigation pumps.
For more than 2,000 years farmers have used irrigation to grow food for the world. However, this doesn’t imply that each one irrigation methods are equally helpful. Knowing what will work greatest in your state of affairs requires information about the choices out there, including the benefits and drawbacks of every. With that in thoughts, here’s a have a look at 5 things to think about in getting water to your crops:
1. Soil kind. เครื่องมือที่ใช้วัดความดันโลหิต of soil in an area can have an result on not solely the type of irrigation technique used but also the irrigation run instances. Sandy soils usually require frequent applications of water at a high fee to maintain moisture in the root zone. Clay soils has a characteristic of holding moisture longer that sandy soils, even so, this may require frequent functions at a lower rate to prevent runoff.
2. Land topography. When it comes to land considerations, hilly or sloping land could be a challenge. Drip irrigation works well if the laterals can be run alongside topographic traces. Often system run times may have to be adjusted to stop runoff. Travelers and center pivot techniques are often out of the query on hilly and severely sloping land.
3. Local climate patterns. In this case, sprinklers are less fascinating in areas where high winds are common and in arid areas with a low humidity since water losses because of evaporation could be extraordinarily high. Drip irrigation works well for each of the above mentioned conditions.
4. Type of crops grown. Sprinkler and drip methods can require excessive levels of funding. Therefore, it’s better to order their use for high-value crops like greens, small fruits and orchard crops somewhat than making use of them to commodity crops like wheat and soybeans.
5. Water high quality. เกจวัดแรงดัน4บาร์ require some sort of filtration. Overhead techniques similar to sprinklers seldom require filtration. Irrigation water must be tested for water borne pathogens. Depending on the crop grown and irrigation technique used chlorine injection may be required. Other water high quality points that could be of concern embrace levels of soluble iron and other dissolved minerals.
Shareg

Leave a Comment